Language: ChineselineEnglish

News

UV inkjet printer normal maintenance methods and details during spring

Dear users, 9060UV printer head is the core part of the device. Any damage, blockage, oblique spraying, etc. will affect the printing effect. Please refer to the following methods to perform necessary maintenance and maintenance on the print head according to the holiday time of each company. .

I. Within 5 days of vacation time:
Prepare a foam board (close to the size of the nozzle bottom plate), PE wrapping film, special cleaning liquid for the nozzle, and a dust-free cloth. Wrap the foam board with no less than 3 layers with a PE wrapping film, and spread no less than 3 layers of dust-free cloth on it. Use a special cleaning solution to evenly wet the dust-free cloth. Then place the foam board on the bottom of the spray head and pad it tightly. . Then use a shading cloth to cover the print head tightly. If there is a secondary ink cartridge switch, turn the switch off and turn off the main power of the device.

2. Holidays with more than 5 days:
1. For 9060UV tablet machine, please close all secondary ink cartridge valves in turn. Use a syringe to flush the print head with a special cleaning solution from the exhaust pipe until no obvious ink or color flows out. Do not pay too much attention when flushing. Do not flow the cleaning solution into Please protect the print head data line interface to avoid damaging the print head. After the flushing, prepare a foam board (close to the size of the print head's bottom plate), PE wrapping film, special cleaning liquid for the print head, and dust-free cloth. Wrap the foam board with no less than 3 layers with a PE wrapping film, and spread no less than 3 layers of dust-free cloth on it. Use a special cleaning solution to evenly wet the dust-free cloth. Then place the foam board on the bottom of the spray head and pad it tightly. . Then use a shading cloth to cover the print head tightly. If there is a secondary ink cartridge switch, confirm that the switch is off and turn off the main power of the device.

2. Please remove the ink bottle from the coiler, and then empty the secondary ink tank and the pipeline ink. There may be an ink shortage alarm during the ink pressure. Please reset it no less than 3 times. After squeezing the ink, insert the ink tube into the cleaning liquid in order to apply the ink, and then press the ink cleaning tube and the nozzle until the nozzle has no obvious ink color flowing out. After flushing, prepare a foam board (close to the size of the nozzle bottom plate), PE wrapping film, special cleaning liquid for the nozzle, and a dust-free cloth. Wrap the foam board with no less than 3 layers with a PE wrapping film, and spread no less than 3 layers of dust-free cloth on it. Use a special cleaning solution to evenly wet the dust-free cloth. Then place the foam board on the bottom of the spray head and pad it tightly. . Then use a shading cloth to cover the print head tightly. If there is a secondary ink cartridge switch, confirm that the switch is turned off, raise the cloth guide to a high position, and turn off the main power of the device.

3. Someone is on time on holidays
When someone is on duty during the holidays, please turn on the machine once every two days. After the machine is turned on, wait for the print head to heat up and press the ink to clean the print head. Print the print head test chart. After confirming that the print head is in good condition, the color block or image should not be less than 2 square. Then shut down normally and cover the print head with a shading cloth.

In particular, pay attention to the maintenance work of the nozzles during the holiday, to ensure the normal use after the start, and customers who do not understand the maintenance of the nozzles during the holidays can call the technical consultation phone 13691798915 below for consultation! I wish you all a happy holiday!

WeChat:liuxingcba
WhatsApp:+86 13691780915
e-mail: rickliuxing@gmail.com
website:http://www.asuvj.com/en/index.html

Scan the qr codeClose
the qr code