Language: ChineselineEnglish

News

How to remove static electricity in UV printing in winter to prevent cracking and separation of the picture

Pay attention to these problems in winter printing, and the picture is anti-cracking and anti-separation
Unknowingly entering winter
Many areas of the country have long been coverhttp://www.asuvj.com/en/product/dz6090.htmled in silver
Sudden drop in temperature
A machine with many users
Floating ink, scattered ink,
Two-way line misalignment, misalignment, etc., especially when using 2513 and 6090uv printers for two-way printing, there will be ink flying beside the pattern.



The main problems are as follows:

[1] The sky is dry and the material is dry, which is prone to static electricity.
[2] As the temperature drops, the firmness of the material adhesion weakens.

To this end, it is recommended to do the following:

Aiming at the problem of high static electricity during the printing process that affects the printing effect:
The main problems are as follows:

【一】The sky is dry and the material is dry, which is prone to static electricity.
[2] As the temperature drops, the firmness of the material adhesion weakens.

To this end, it is recommended to do the following:

Aiming at the problem of high static electricity during the printing process that affects the printing effect:
As the ambient temperature drops, the adhesion drops. Can increase the indoor temperature. It is recommended to increase the indoor temperature by 20-25 degrees and the humidity around 55-65.
a. Check that the antifreeze in the water tank is sufficient.
b. Clean the uv lamp glass with alcohol.
c. Increase the lamp power.
e. Coating is recommended to ensure fastness. Acrylic coating, crust sheet, aluminum-plastic plate, metal coating on metal and glass.

Also pay attention to the lifting screw, x guide rail, y guide rail, y screw, clean up. Apply a small amount of lubricating oil or grease evenly.
So, what materials are suitable for winter printing?
PVC material
For winter, material manufacturers will add some modifiers to PVC materials to make it more flexible and more suitable for use in colder places.
textile
On the one hand, textiles are extremely flexible and will not crack or separate in winter. On the other hand, the pattern colors of textile outdoor advertisements can penetrate into the textile fibers and are not easy to fade.
PE material
It is a new type of outdoor advertising material abroad. It has excellent low temperature resistance (the lowest operating temperature can reach -100~-70°C), good chemical stability, and can withstand most acids and alkalis (not resistant to oxidizing acids). It is insoluble in general solvents at room temperature, has low water absorption and excellent electrical insulation.

WeChat:szuvprinter
WhatsApp:+86 13691780915
e-mail: rickliuxing@gmail.com
website:http://www.asuvj.com/en/index.html


Scan the qr codeClose
the qr code